Home Page | Prof. Neelesh Kumar Jain
INDIAN INSTITUTE OF TECHNOLOGY INDORE
logo1
FACULTY PROFILE
Prof. Neelesh Kumar Jain
BOOK CHAPTERS
  1. Vishal Kharka, Neelesh Kumar Jain (2021) “Achieving Sustainability in Machining of Cylindrical Gears” accepted for publication as Chapter 15 in Handbook-IV on Sustainable Manufacturing (Editors Kapil Gupta and Konstantinos Salonitis,), Elsevier, Netherlands, pp 391-426, ISBN: 978-0-12-818115-7, DOI: 10.1016/B978-0-12-818115-7.00002-X
  2. Anand Petare, Neelesh Kumar Jain, I A Palani (2021) “On Abrasive Flow Finishing of Straight Bevel Gear” Recent Advances in Mechanical Infrastructure: Proceedings of ICRAM 2020 (Editors: A K Parwani, PL Ramkumar, K Abhishek, S K Yadav) Springer Nature Singapore Pvt. Ltd. pp 95-104, eBook ISBN: 978-981-33-4176-0, Hardcover ISBN: 978-981-33-4175-3, DOI: 10.1007/978-981-33-4176-0_8
  3. Vivek Rana, Anand C. Petare, Neelesh Kumar Jain (2020) “Advances in Abrasive Flow Finishing” Chapter 7 in Advances in Abrasive Based Machining and Finishing Processes (Editors: S. Das, G. Kibria, B. Doloi, B. Bhattacharyya), Springer Nature Singapore Pte Ltd (ISBN: 978-3-030-43311-6)
  4. Anand C. Petare, Neelesh Kumar Jain, I.A. Palani (2019) “Effect of Finishing Time on Surface Finish of Spur Gears by Abrasive Flow Finishing (AFF) Process” Chapter 9 in Advances in Unconventional Machining and Composites: Proceedings of AIMTDR 2018 (Editors: M. S. Shunmugam, M. Kanthababu), Springer Nature Singapore Pte Ltd (ISBN 978-981-32-9470-7; ISBN 978-981-32-9471-4 (eBook)), , pp. 101-111, DOI: 10.1007/978-981-32-9471-4_9
  5. Sagar H. Nikam, Neelesh Kumar Jain (2017), “Laser-Based Repair of Damaged Dies, Molds, and Gears” Chapter 6 in Advanced Manufacturing Technologies: Modern Machining, Advanced Joining, Sustainable Manufacturing (Editor: Kapil Gupta), Springer International Publishing AG, Switzerland, pp. 137-159, ISBN (online): 978-3-319-56099-1. DOI: 10.1007/978-3-319-56099-1_6
  6. Neelesh Kumar Jain, Sunil Pathak (2017), “Fine Finishing of Gears by Electrochemical Honing Process” Chapter 16 in Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes (Editor: V. K. Jain), CRC Press Taylor & Francis Group New York (USA), 2017, pp. 407–446, eBook ISBN: 978-1-315-40409-7; Paperback ISBN: 978-1-4987-4594-9.
  7. N.K. Jain, Mayur S Sawant, Sagar H Nikam, S Jhavar (2016), “Metal Deposition: Plasma-Based Processes” Chapter 63 in Encyclopedia of Plasma Technology (Editor: J. Leon Shohet), CRC Press, pp. 722-740, eBook ISBN: 978-1-4822-1431-4. DOI: 10.1081/E-EPLT-120053919. http://www.crcnetbase.com/DOI/10.1081/E-EPLT-120053919
  8. N.K. Jain, A.C. Petare (2016), “Review of Gear Finishing Processes”, Chapter 1.4 in Comprehensive Materials Finishing-Vol. 1, (Editor: M.S.J. Hashmi) pp. 93–120, Elsevier, Oxford (UK), (ISBN: 978-0-12-803581-8). DOI: 10.1016/B978-0-12-803581-8.09150-5
  9. N.K. Jain, Chaubey, S.K. (2016), “Review of Miniature Gear Manufacturing”, Chapter 1.17 in Comprehensive Materials Finishing-Vol. 1, (Editor: M.S.J. Hashmi) pp. 504–538, Elsevier, Oxford (UK), (ISBN: 978-0-12-803581-8). DOI: 10.1016/B978-0-12-803581-8.09159-1
  10. N.K. Jain, Pathak, S. (2016), “Electrochemical Processing and Surface Finish”, Chapter 3.23 in Comprehensive Materials Finishing-Vol. 3, (Editor: M.S.J. Hashmi) pp. 358-379, Elsevier, Oxford (UK), (ISBN: 978-0-12-803581-8). DOI: 10.1016/B978-0-12-803581-8.09182-7
  11. Jhavar, S.; N.K. Jain, (2014), “Development of Micro-Plasma Wire Deposition Process for Layered Manufacturing” Chapter 20 in DAAAM International Scientific Book 2014, pp. 239-256, B. Katalinic (Ed.), Published by DAAAM International Vienna, Austria, ISBN 978-3-901509-94-0, ISSN 1726-9687. DOI: 10.2507/daaam.scibook.2014.20
  12. Pathak, S.; N.K. Jain, Palani, I A (2014), “Improving Surface Quality of Bevel Gears by Pulsed-ECH Process” Chapter 19 in DAAAM International Scientific Book 2014, pp. 221-238, B. Katalinic (Ed.), Published by DAAAM International Vienna, Austria, ISBN 978-3-901509-94-0, ISSN 1726-9687. DOI: 10.2507/daaam.scibook.2014.19
  13. Gupta, K.; N.K. Jain, (2013), "Manufacturing of High Quality Miniature Gears by Wire Electric Discharge Machining" Chapter 40 in DAAAM International Scientific Book 2013, pp. 679-696, B. Katalinic & Z. Tekic (Eds.), Published by DAAAM International Vienna, Austria, ISBN 978-3-901509-94-0, ISSN 1726-9687. DOI: 10.2507/daaam.scibook.2013.40
  14. Shaikh, J.H.; N.K. Jain, (2013), "High Quality Finishing of Bevel Gears by Electrochemical Honing" Chapter 41 in DAAAM International Scientific Book 2013, pp. 697-710, B. Katalinic & Z. Tekic (Eds.), Published by DAAAM International Vienna, Austria, ISBN 978-3-901509-94-0, ISSN 1726-9687. DOI: 10.2507/daaam.scibook.2013.41
  15. Shandilya, Pragya; Jain, P. K., N.K. Jain, (2011), “Wire Electric Discharge Machining of Metal Matrix Composite Materials”, Chapter 30 in DAAAM International Scientific Book 2011, pp. 383-400, B. Katalinic (Ed.), Published by DAAAM International Vienna, Austria, ISBN 978-3-901509-84-1, ISSN 1726-9687. DOI: 10.2507/daaam.scibook.2011.30
  16. Neelesh K Jain, Vijay K Jain (2001), “Computer Aided Process Planning in Agile Manufacturing Environment” Chapter 27 in Agile Manufacturing: 21st Century Competitive Strategy, Editor: A. Gunasekaran, Elsevier Science Publications, pp. 515-534. E-ISBN: 9780080526881 (Jan 2001)
  17. Neelesh K Jain, Vijay K Jain, (1999), “Computer Aided Process Planning (CAPP) Approach for Advanced Machining Processes” in Users' Encyclopedia (on CD-ROM) of International Journal of Industrial Engineering Application and Practice (Editor: A. Mital).