Home Page | Prof. Neelesh Kumar Jain
INDIAN INSTITUTE OF TECHNOLOGY INDORE
logo1
FACULTY PROFILE
Prof. Neelesh Kumar Jain
PAPERS IN THE REFEREED CONFERENCE PROCEEDINGS


  1. Pradyumn Kumar Arya, Bhavesh Chaudhary, Neelesh Kumar Jain, Jayaprakash Murugesan (2020) “Effect of Tool Pin Profile on Mechanical and Wear Properties of Friction Stir Welding of Dissimilar AA6061 and AA5052 Aluminium Alloys" International Conference on Industrial and Manufacturing Systems (CIMS), 26-28 June, National Institute of Technology, Jalandhar, India.
  2. Pradyumn Kumar Arya, Neelesh Kumar Jain, Jayaprakash Murugesan (2020) “Physical and Mechanical Properties of Almond shell Powder and Glass Fiber Reinforced Polyester Composite” 6th Asian Conference on Heat Treatment and Surface Engineering, 5-7 March, Chennai Trade Center, Chennai, India


  1. Anand C. Petare, N.K. Jain (2018), “Effect of finishing time on surface finish of spur gears in abrasive flow finishing process” Proceedings of 7th International and 28th national All India Manufacturing Technology, Design and Research (AIMTDR) Conference, 15-17 Dec 2018, Anna Unversity, Chennai (India)
  2. Muneer Alam, N.K. Jain, Sunil Pathak (2018), “Investigations on Copper Nano-Particles Synthesis by Pulsed Electrochemical Dissolution (PECD) Process” Proceedings of 4th International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2018), 1-2 Aug 2018, Universiti Malayasia Pahang, Kuala Lumpur, Malaysia, pp 566-568.


  1. Sunil Pathak, N.K. Jain (2017), “Effects of Various Parameters of Micro-Geometry on Performance Characteristics of Gears” Proceedings of 3rd International Conference and Exhibition on Automobile Engineering, September 28-29, 2017 Berlin, Germany, p 12 (DOI: 10.4172/2167-7670-C1-008).


  1. Sunil Pathak, N.K. Jain, I.A. Palani (2016), “Study on Surface Imperfections of Gears: Sources, Effects and Techniques for Concerned Improvements” Proceedings of 30th International Conference on Surface Modification Technologies (SMT30), Milan, Italy 29th June- 1st July 2016.


  1. Kapil Gupta, N.K. Jain, R.F. Laubscher (2015), “Experimental Investigations on Manufacturing of High Quality Miniature Gears by Wire Electric-Discharge Machining“ Proceedings of International Conference on Gear Production, Garching (Germany), Oct. 5-7, 2015, 1471-1481, VDI Verlag GmbH, Dusseldorf 2015 (ISBN: 978-3-18-092255-3).
  2. Sunil Pathak, N.K. Jain, I.A. Palani (2015), “Influence of Electrolyte Flow Rate and Rotary Speed on Surface Modification of Bevel Gear Finished by PECH” Proceedings of 29th International Conference on Surface Modification Technologies (SMT29), Technical University of Denmark, June 10-12, 2015, pp. 112-118 (ISBN: 978-81-926196-2-0) (Editors: T. S. Sudarshan and M.A.J. Somers)
  3. Deepak Raj, R Tyagi, I.A. Palani, N.K. Jain (2015), "Laser Assisted Shock Peening of Miniature Gears" Proceedings of International Conference on Robotics, Automation and Embedded Systems (RACE 2015) Feb. 18-20, 2015, Hindustan University, Chennai (India).


  1. J.H. Shaikh, N.K. Jain (2014), “Form Error Correction of Bevel Gears by Electrochemical Honing Process” Proceedings of 5th International and 26th All India Manufacturing Technology, Design and Research (AIMTDR) Conference Dec. 12-14, 2014, IIT Guwahati, 472-1 (6 pages) (DOI: 10.13140/2.1.1684.3843) (ISBN: 978-8-19274-612-8).


  1. Kapil Gupta and N.K. Jain (2013), "Deviations in geometry of miniature gears fabricated by wire electrical discharge machining" (IMECE2013-66560), Proceedings of International Mechanical Engineering Congress & Exposition (IMECE 2013) of ASME, Nov. 13-21, 2013, San Diego, California, USA (DOI: 10.1115/IMECE2013-66560).
  2. Kapil Gupta, N.K. Jain (2013), "On productivity of wire electric discharge machining for manufacturing of miniature gears" Proceedings of 2nd International Conference on Intelligent Robotics, Automation and Manufacturing 2013 (IRAM 2013), Dec. 16-18, 2013, IIT Indore (Eds. N. K. Jain, I A Palani, B K Lad, M S Kumar and A Parey), 428-439, Emerald Group Publishing (India) Pvt. Ltd, New Delhi (ISBN: 978-0-99268-001-5).
  3. J.H. Shaikh, N.K. Jain (2013), "Experimental investigations on influence of electrolyte parameters on surface quality of bevel gears finished by ECH", Proceedings of 2nd International Conference on Intelligent Robotics, Automation and Manufacturing 2013 (IRAM 2013), Dec. 16-18, 2013, IIT Indore, India (Eds. N. K. Jain, I A Palani, B K Lad, M S Kumar and A Parey), 306-319, Emerald Group Publishing (India) Pvt. Ltd, New Delhi (ISBN: 9780992680015).
  4. Sunil Pathak, N.K. Jain, I.A. Palani (2013), "Methodology for precision finishing of conical gears using automated field controlled Electrochemical Honing process", Proceedings of 2nd International Conference on Intelligent Robotics, Automation and Manufacturing 2013 (IRAM 2013), Dec. 16-18, 2013, IIT Indore, India (Eds. N. K. Jain, I A Palani, B K Lad, M S Kumar and A Parey), 440-449 (ISBN: 9780992680015).
  5. Suyog Jhavar, N.K. Jain, C.P. Paul (2013), "Effect of Work Material Hardness and Machining Parameters on Burr-formation and Surface Finish in Micro-Milling of AISI D2 Steel" Proceedings of 2nd International Conference on Intelligent Robotics, Automation and Manufacturing 2013 (IRAM 2013), Dec. 16-18, 2013, IIT Indore, India (Eds. N. K. Jain, I A Palani, B K Lad, M S Kumar and A Parey), 547-555. (ISBN: 9780992680015)


  1. Pragya Shandilya, P.K. Jain, N.K. Jain (2012), “Artificial neural network kerf model in Wire Electric Discharge Machining of SiCp/6061 Al MMC”. Proceedings of 4th International and 25th All India Manufacturing Technology Design and Research Conference, 14-16 December, 2012, Jadavpur University, Kolkata, India.
  2. Pragya Shandilya, P.K. Jain, N.K. Jain (2012) ,“A comparative study of ANN and RSM models for predicting process parameters during WEDC of SiCp/6061 Al MMC”, Proceedings 37th International MATADOR Conference July 2012 (Eds: S. Hinduja and L. Li), 67-70, Springer-Verlag London, Oct 2012. (DOI: 10.1007/978-1-4471-4480-9_3).


  1. Pragya Shandilya, P.K. Jain, N.K. Jain (2011), “Selection of optimum parameters in wire electric discharge cutting (WEDC) of SiCp/6061 Al MMC”. Proceedings of 5th International Conference on Advances in Mechanical Engineering (ICAME 2011), 6-8 June, 2011, SVNIT, Surat, India, 666-670.
  2. Pragya Shandilya, P.K. Jain, N.K. Jain (2011), “Surface Integrity Aspects after Wire Electric Discharge Machining of SiCp/6061 Al Metal Matrix Composites”. Proceedings of International Conference on Advanced Materials and Manufacturing Processes (ICAMP), 9-11 December, 2011, IIT Kharagpur, India.


  1. Pragya Shandilya, P.K. Jain, N.K. Jain (2010), “On Wire Breakage and Microstructure in WEDC of SiCp/6061 Aluminum Metal Matrix Composites”. Proceedings of 3rd International and 24th AIMTDR Conference, 13-15 December, 2010, Andhra University, Visakhapatnam, India, 1089-1094 [Eds: B. Satyanarayana and K. Ramji].
  2. Abhishek Das, N.K. Jain, A. Wanner, V. Schulze (2010), "Effect of Coating Time and Electrode Polarity in Electro Discharge Coating of Al using TiC/Cu Green Compact Tool", Proceedings of 3rd International and 24th AIMTDR Conference, 13-15 Dec. 2010, Andhra University, Visakhapatnam, India, 527-530 [Eds: B. Satyanarayana and K. Ramji].
  3. J.P. Misra, H. Singh, N.K. Jain, P.K. Jain (2010), "Effect of Electrolyte Composition and Temperature on Finishing of Spur Gears by Pulse Electrochemical Honing (PECH)", Proceedings of 3rd International and 24th AIMTDR Conference, 13-15 Dec. 2010, Andhra University, Visakhapatnam, India, 903-908 [Eds: B. Satyanarayana and K. Ramji].
  4. Pragya Shandilya, P.K. Jain, N.K. Jain (2010), “Study on average cutting speed in WEDM of SiCp/6061 Al MMC based on RSM”. Proceedings of 4th International Conference on Advances in Mechanical Engineering (ICAME 2010), 23-25 September, 2010, SVNIT Surat (India), 394-398 [Ed: R.V. Rao].
  5. J.P. Misra, H. Singh, P.K. Jain, N.K. Jain (2010), "Parametric optimization of pulse electrochemical honing by response surface methodology" Proceedings of 4th International Conf. Advances in Mechanical Engineering (ICAME 2010), 23-25 Sep. 2010, SVNIT Surat (India), 331-335. [Ed: R. V. Rao].


  1. J.P. Misra, N.K. Jain, A.K. Sharma (2009), “Effect of finishing time and electrolyte on precision finishing of helical gears by Electrochemical honing (ECH) process”, Proceedings of 6th International Conference on Precision, Meso, Micro and Nano Technology (COPEN 6), 11-12 Dec. 2009, PSG College of Technology, Coimbatore, India, F24-29.
  2. J.P. Misra, A.K. Sharma, N.K. Jain (2009), “Setup For Electrochemical Honing of Helical Gears” Proceedings of National conference on Emerging Trends in Manufacturing Engineering (ETME), 20-21 March 2009, G. H. Patel College of Engineering and Technology, Vallabh Vidyanagar, India, 171-177.
  3. J.P. Misra, A.K. Sharma, N.K. Jain (2009), “Design of Experiments for Electrochemical Honing of Helical Gears” Proceedings of the International Conference on Emerging Research and Advances in Mechanical Engineering (ERA 2009), 19-21 March 2009, Velammal Engineering College, Channai, 874-878.


  1. L. Ramlal Naik, N.K. Jain, A.K. Sharma (2008), “Investigation on Precision Finishing of Spur Gears by Electrochemical Honing” Proceedings of 2nd International and 23rd AIMTDR Conference, 15-17 Dec. 2008, IIT Madras, India, (Ed. M.S. Shunmugam and N. Rameshbabu), 509-514.


  1. A.K. Dubey, H.S. Shan, N.K. Jain (2006), “Analysis of Surface Roughness and Out-of-Roundness in Electro-Chemical Honing Process” Proceedings of 1st International and 22nd AIMTDR Conference, 21-23 Dec. 2006, IIT Roorkee, India, 887-892 [Eds: N K Mehta, P. K. Jain, A K Sharma].
  2. N.K. Jain, V.V. Rao (2006), “Process Selection Methodology for Rapid Prototyping (RP) Processes”, Proceedings of 1st International and 22nd AIMTDR Conference, 21-23 Dec. 2006, IIT Roorkee, India, 815-821. [Eds: N K Mehta, P. K. Jain, A K Sharma].
  3. A.K. Dubey, H.S. Shan, N.K. Jain (2006), “Precision Micro-Finishing By Electro-Chemical Honing” Proceedings of International Conference on Manufacturing Science and Technology (ICOMAST), 28-30 August, 2006, Multi Media University, Maleka, Malaysia, 173-176 (DOI: 10.13140/2.1.5011.2323).
  4. Amitabha Mukerjee, N.K. Jain (1997), “A Featureless Approach to Process Planning” Proceedings of International Conference on Robotics and Automation [ICRA' 97], New Mexico (USA) April 1997, 2747-2752 (DOI:10.1109/ROBOT.1997.606702).
  5. Amitabha Mukerjee, N.K. Jain (1997), “Featureless Process Planning” Proceedings of 17th AIMTDR Conference, REC Warangal, Jan. 1997 [Eds: R.L. Murthy, G. Srihari, and C.S.P. Rao], pp. 125-130. (This Paper Won the 2nd Best Paper Award)